|
|
Instruments“增材制造”领域文章精选 | MDPI 编辑荐读 |
|
期刊名:Instruments
期刊主页:https://www.mdpi.com/journal/instruments
本期精选了2023–2024年Instruments期刊发表的8篇增材制造领域的文章。希望能为相关领域学者提供新思路,欢迎阅读与交流。
1.英文标题:
A 3D Printed Air-Tight Cell Adaptable for Far-Infrared Reflectance, Optical Photothermal Infrared Spectroscopy, and Raman Spectroscopy Measurements
中文标题:
用于远红外反射、光学光热红外光谱和拉曼光谱测量的 3D 打印气密池
文章链接:https://www.mdpi.com/2410-390X/8/4/54
2.英文标题
Red and Green Laser Powder Bed Fusion of Pure Copper in Combination with Chemical Post-Processing for RF Cavity Fabrication
中文标题
应用纯铜红绿激光粉末床熔融技术结合化学后处理技术制造射频腔体
文章链接:https://www.mdpi.com/2410-390X/8/3/39
3.英文标题
A Portable Tool for Spectral Analysis of Plant Leaves That Incorporates a Multichannel Detector to Enable Faster Data Capture
中文标题
一种配备多通道探测器以实现高速数据采集的植物叶片光谱分析便携工具
文章链接:https://www.mdpi.com/2410-390X/8/1/24
4.英文标题
Improving Fabrication and Performance of Additively Manufactured RF Cavities by Employing Co-Printed Support Structures and Their Subsequent Removal
中文标题
通过共印支撑结构及其后续移除技术改善增材制造射频腔体的制造和性能
文章链接:https://www.mdpi.com/2410-390X/8/1/18
5.英文标题
Radio Frequency Properties of a 3D Printed Klystron Circuit
中文标题
一种3D打印速调管电路的射频特性研究
文章链接:https://www.mdpi.com/2410-390X/8/1/9
6.英文标题
Additive Manufacturing of Side-Coupled Cavity Linac Structures from Pure Copper: A First Concept中文标题
纯铜增材制造侧耦合腔直线加速器结构:初步概念
文章链接:https://www.mdpi.com/2410-390X/7/4/56
7.英文标题
Utilization of Additive Manufacturing for the Rapid Prototyping of C-Band Radiofrequency Loads
中文标题
应用增材制造技术快速原型制造C波段射频负载
文章链接:https://www.mdpi.com/2410-390X/7/3/23
8.英文标题
Additive Manufacturing of an IH-Type Linac Structure from Stainless Steel and Pure Copper
中文标题
采用不锈钢和纯铜增材制造 IH 型直线加速器结构
文章链接:https://www.mdpi.com/2410-390X/7/3/22
Instruments (ISSN 2410-390X) 创刊于2017年,是一本国际性的、经同行评审的开放获取期刊,旨在为仪器、装置和实验技术的设计与应用研究提供一个领先的学术平台。目前,Instruments 已被 ESCI (Web of Science)、Scopus、Inspec、CAPlus/SciFinder、INSPIRE等数据库收录。投稿后21.1天内获得第一次决定,接收到发表的时间为3.8天(2025年上半年在该期刊发表的论文的中位数值)。
特别声明:本文转载仅仅是出于传播信息的需要,并不意味着代表本网站观点或证实其内容的真实性;如其他媒体、网站或个人从本网站转载使用,须保留本网站注明的“来源”,并自负版权等法律责任;作者如果不希望被转载或者联系转载稿费等事宜,请与我们接洽。